CHAINLINK NETTING
COMPLETE SELVAGE PROCESS
The twisting (barbing) and/or knuckling operations occur simultaneously with the weaving. This means that you lose no time in performing these operations separately. The two salvaging units on either side of the fabric can process fences of three type :
Changing over from knuckling to twisting or vice-versa requires only changing the cam and attachments shown in the picture.
CORRECT MEASURE OF MESH
To give the correct measurement of mesh overture size, netting must be fully stretched. The mesh size is taken as the distance between two parallel wires of the diamond-shaped mesh. It does not include thickness of the wire.
FENCE MATERIAL
The contractor shall construct the chainlink fencing in accordance with the details show in the drawings or as directed by engineers. The complete set of chainlink fencing must consist of line posts ( corner post, intermediate post and standard post), chainlink with proper diameter and standard port), chainlink with proper diameter and mesh, accessories and some lines of barbed wire, if required. The wire size and mesh of chainlink fence hall be adjusted to conform the tolerance specified in BS 1052:19080 and 4102:1963 and SNI 07-6503-2001. For Chainlink with PVC coating, the core wire shall be mild steel with well-adhered galvanized coating. The PVC coating shall be good quality UV stabilized coating, tightly wrapped around the core wire. Customers can choose the attractive color according to their requirements, i.e. green, blue, yellow, white, or else.
PRODUCT SPECIFICATION
TOLERANCES
Chainlink Netting is manufactured according to the tolerances specified in SNI 07-6503-2001 as shown :
STANDART WIRE STEEL SIZE FOR CHAINLINK WIRE NETTING
Standard Heavy Galvanized | PVC Coated | Fusion Bonded Quality | ||||
---|---|---|---|---|---|---|
Wire Diameter | Tolerance | Core Wire Diameter | Minimum Wire Size | Core Galvanized Wire / Strand | Polimer Coated Wire | |
Diameter | Tolerance | |||||
1,60 2,00 2,20 2,70 3,00 3,50 3,75 4,00 5,00 | +/- 0,05 +/- 0,06 +/- 0,08 +/- 0,08 +/- 0,08 +/- 0,10 +/- 0,10 +/- 0,10 +/- 0,10 | 1,60 2,00 2,20 2,70 3,00 3,50 3,75 4,00 5,00 | +/- 0,05 +/- 0,06 +/- 0,08 +/- 0,08 +/- 0,08 +/- 0,10 +/- 0,10 +/- 0,10 +/- 0,10 | 2,15 2,70 3,15 3,65 4,00 4,75 5,10 5,40 6,70 | 2,10 2,30 2,50 3,00 3,15 3,65 3,70 4,50 | 2,60 2,80 3,00 3,50 3,65 4,15 4,20 5,00 |
STANDART MESH SIZE AND TOLERANCE
Standard Mesh Size | Tolerance |
---|---|
20 ; 30 ; 40 ; 50 ; 55 ; 75; 100 | +/- 3 |
FUSION BONDED QUALITY
The high-quality wire consists of a standard galvanized core wire bonded with a highly adhesive PVC coating. This particular coating technique is preceded by the application and curing of a primer followed by the application of a PVC coating.
This technology combines the typical adhesive properties of fusion bonded coatings with the surface quality of extruded wires resulting in a clean, aesthetic and crack resistant coating. thanks to these features, the PVC coated wire is ideal to be used in environments that are exposed to extreme temperatures, highly corrosive atmospheres and abrasive elements (coastal areas, deserts, etc).
Diameter mm | |||
---|---|---|---|
Core Galvanized Wire / Strand | Polimer Coated Wire | Polimer Type | Density (g/cm2) |
2,10 2,30 2,50 3,00 3,15 3,65 3,70 4,50 | 2,60 2,80 3,00 3,50 3,65 4,15 4,20 5,00 | PVC PVC PVC PVC PVC PVC PVC PVC | 1,35 1,35 1,35 1,35 1,35 1,35 1,35 1,35 |
Standard Galvanize
With galvanized thickness of 40 – 70 g/m2 (min. zinc coating : Class 1)
Heavy Galvanized
With galvanized thickness of min. 260 g/m2 (conforming BS 443 :1969)
Bezinal Wire
Galvanized Wire + PVC Coating
(min. PVC thickness :0.45 mm)
Fusion Bonded (PVC Fused to Wire)